51
Appendix E:
For the Router’s Web-based Utility
Wireless-B Broadband Router
3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet
adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
The example in Figure E-3 shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may
show something different.
For the Router’s Web-based Utility
The MAC Address Clone screen is located on the Setup tab.
MAC Clone Service. To enable the function so you can clone a MAC address, select Enable from the drop-down
list.
For MAC address cloning, enter the 12-digit MAC address in the MAC Address fields provided, two digits per field.
Figure E-3: MAC Address/Physical Address
Note: The MAC address is also called the Physical Address.
Figure E-4: MAC Address Clone
To Next Page
Loading...
