28
Chapter 5: Configuring the Wireless-B Broadband Router
The Administration Tab - Factory Defaults
Wireless-B Broadband Router
The Administration Tab - Factory Defaults
Click the Yes button to reset all configuration settings to their default values, and then click the Save Settings
button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by
default. Click the Cancel Changes button to cancel your changes.
Figure 5-33: Administration Tab - Factory Defaults
IMPORTANT: Restoring the Router’s factory
default settings will erase all of your settings
(WEP Encryption, Wireless and LAN settings, etc.),
and replace them with the factory defaults. Do not
reset the Router if you want to retain these
settings.
To Next Page
Loading...
