Dual-Mode Internet Telephony Kit
64
Chapter 4: Using the Dual-Mode Internet Telephony Kit
Using Advanced Features
6. Select ON or OFF.
7. Select OK.
Setting the Dialing Mode (Landline Only)
The dialing mode is used only when you are making a call. By default, the handset is set to tone dialing. You can
switch to pulse dialing if necessary.
1. Select MENU.
2. Select ADVANCED.
3. Select OK.
4. Select DIAL MODE.
5. Select OK.
6. Select TONE or PULSE.
7. Select OK.
NOTE: You can temporarily use tone dialing while the handset is in pulse dial mode. Press and hold
the # key to set temporary tone dialing. The letter “d” will be displayed on the screen. All of the
digits will be dialed as tones until you hang up. Then the handset will revert back to pulse dial mode.
To Next Page
Loading...
