5
With the supplied
ethernet cable,
plug one end into
the Linksys router
in the port labelled
‘internet’, and the
other end into
the correct port in
your wall-mounted
Gigaclear fibre box
(see below).
Box A
SPNMX55/SPNMX42
Connect to
port 1
Box D
For Box D only:
Once you have connected the
ethernet cable, route the wire
around the housing enclosure
so that it comes through the
opening at the boom. Replace
the wall mount enclosure panel
and fasten with the 2 screws.
Now go to Step 6.
Box B
Connect to
port 1
Box C
Connect to
LAN1
Connect to
10GE
To Next Page
Loading...
