Need help?Do you have a question about the Linksys LRT214 and is the answer not in the manual?
General| Color | black/blue, multi |
|---|---|
| Wi-Fi Mesh System | no |
| Frequency Band | not applicable |
| Ethernet Standard | 10/100/1000 |
| Gigabit Ethernet Speed | yes |
| Firewall | nat, spi |
| Ports | rj-45 |
| LAN Ports | 4 |
| Built In Modem | yes |
Weight and Dimensions| Height | 1.6 inches |
|---|---|
| Width | 7.5 inches |
| Net Weight | 1.6 pounds |
Guides initial login and viewing the router's system status page.
Guides users through the basic setup wizard for easy network configuration.
Configure LAN, WAN, and DMZ settings for network connections.
Configure WAN ports for internet connection and DMZ port settings.
Configure automatic (DHCP) or static IP addressing for internet connection.
Set the LAN IP address and subnet mask for the router.
Set up DHCP server for automatic IP assignment to LAN computers.
Bind IP and MAC addresses for IPv4 devices to prevent unauthorized access.
Configure DHCP settings specific to IPv4 addressing.
Configure DHCP settings specific to IPv6 addressing.
Manage Dual WAN settings and network service detection.
Set the maximum upstream and downstream bandwidth from the ISP.
Assign priority levels to specified services for QoS management.
Choose between Rate Control and Priority for QoS management.
Configure port settings like disable, priority, speed, duplex, and VLAN.
Manage network packet traffic and determine access allowed by the firewall.
How to add or edit custom firewall access rules.
Displays the current status of VPN tunnels, including used and available tunnels.
Indicates if the OpenVPN server is enabled and its configuration status.
Guides users to add a new IPSec tunnel between remote clients and the router.
Configure local and remote VPN security gateway types and IP settings.
To Next Page
