Linksys LRT214

54
VPN
Linksys
IP Only: Must enter the IP address to gain access
to this tunnel. The WAN IP address will
be automatically filled into this space. No
further settings necessary.
IP + Domain Name (FQDN)
Authentication:
The WAN IP address will be automatically
filled into this field. No further settings
necessary. FQDN refers to the combination
of host name and domain name, and can
be retrieved from the Internet, e.g., vpn.
server.com.
IP + E-mail Address (USER
FQDN) Authentication:
If users select IP address and email, enter
the IP address and email address to access
to this tunnel. The WAN IP address will be
automatically filled into this space. No
further settings necessary.
Dynamic IP + Domain Name
(FQDN) Authentication:
If users select this option to link to VPN,
please enter the domain name.
Dynamic IP + E-mail Address
(USER FQDN) Authentication:
If using dynamic IP address to connect
to the device, select this option. When
VPN Gateway asks for VPN connection,
the device will start authentication and
respond to VPN tunnel connection. If users
select this option to link to VPN, enter email
address for email authentication.
• Local Security Group Type allows users to set the local VPN connection
access type.
IP Address: Designates the IP address to build the VPN tunnel.
Subnet: Allows local computers in this subnet to connect to the
VPN tunnel.
IP Range: Allows a range of IP addresses to use this tunnel. Input IPs
for the beginning and the end of the range.
Domain Name: Input the domain name if Domain Name (FQDN)
Authentication is selected.
Email Address: Input the email address if Email Address (USER FQDN)
Authentication is selected.
Remote Client Setup for Single Remote User (Tunnel is Chosen.)
IP Only: Must enter the IP address to access to this tunnel.
You can also select IP by DNS Resolved, and enter the
domain name of the client on the Internet. The router
will automatically get the IP address by DNS Resolved.
IP + Domain
Name (FQDN)
Authentication:
Enter the domain name and IP address.
IP+E-mailAddress
(USER FQDN)
Authentication:
Enter the IP address (Or IP By Resolved) and email
address.
Dynamic IP
+ Domain
Name (FQDN)
Authentication:
Enter the domain name to authenticate the client. The
domain name can be used for only one tunnel.
Dynamic IP +
E-mail Address
(USER FQDN)
Authentication:
Enter the email address to authenticate the client.
Remote Client Setup for Group VPN
Specify the method for identifying the clients to establish the VPN tunnel. The
following options are available for a Group VPN.