65
Log
Linksys
Log
The router has the real-time surveillance management feature that provides
information about current system operation. From the log management and
look up, we can see the relevant operation status and traffic statistics. Setup
error and attack alerts here.
System Log
Go to Device Configuration > Log > System Log page to configure syslog and
alerts. You can also view the log tables here.
NOTE Remember to click Save before leaving the page. You can also click
Cancel to leave without any change.
Syslog
The device provides external system log servers with a log collection feature.
System log is an industrial standard communications protocol, which is
designed to dynamically capture related system messages from the network.
The system log provides the source and the destination IP addresses during the
connection, service number, and type.
Enable Syslog Check to enable syslog.
Syslog Server Enter the syslog server name or IP address.
Email Alert
Enable email alerts to send logs to a specified email address.
Enable Email Alert: Check to enable.
Mail Server: Enter the mail server name or IP address.
Authentication: Choose which kind of authentication: None, Login
Plain, TLS or SSL.
SMTP Port: Input the SMTP port from 1-65535. The default is
25.
Username/ Password: Input the username and password of the email
account.
Send Email to: Input the email address.
Log Queue Length: Set the number of log entries. The default entry
number is 50. When this defined number is reached,
the system will automatically send out the log mail.
Log Time Threshold: Set a time interval for the system to send the
log. The default is 10 minutes. The system will
automatically send out the log every 10 minutes
unless you change the interval.
Email Log Now Click this button to immediately send a message to
the specified email address, to test your settings.
To Next Page
Loading...
