Linksys LRT214

34
System Management
Linksys
• Priority: Identify priority for specified services.
Interface: Select on which WAN the QoS rule should be executed. It
can be a single selection or multiple selections.
Service: Select a service to manage. You can also click Service
Management to add service items.
Direction: Upstream: outbound traffic.
Downstream: Downstream: inbound traffic.
Priority: High or Low
Delete: Click to delete an existing entry.
Update: Select the entry that you want to modify. Change the
setting and click Update. Clicking Add New will deselect
the entry and clear the text fields.
View: Click Refresh to update the display or Close to return to
configuring page.
Adding a service
To add a new service item or to edit an existing service, click Service
Management. If the web browser displays a warning about the pop-up window,
click to allow the blocked content.
In the Service Management window, add or edit entries as needed. After
setting a rule, be sure to click OK to save your settings or click Cancel to undo
them. To add a service to the list, enter the following information, and click Add
to list. You can have up to 30 services in the list.
o Service Name: Name the service.
o Protocol: TCP, UDP or Ipv6.
o Port Range: Enter a range.
• To add another new service, enter the information, and click Add to list.
• To edit a service you created, select the service in the list and click Update.
If you do not need to make changes, click Add New to deselect the service
and clear the text fields.
• To delete a service from the list, click Delete.