Linksys LRT214

43
Firewall
Linksys
Priority Indicates the priority of the access rule; 1 being
the highest. Select an option from the drop-down
list to change the priority. The default access rules
have the lowest priority.
Enable A new rule will be automatically assigned with a
priority. You can change the priority by editing.
To add a new rule Check the Enable box to enable or uncheck to
disable. The default rules are not allowed to
change.
To edit a custom rule Click Edit.
To delete an existing
rule
Click Delete and click OK to continue, or click
Cancel to close the message without deleting the
rule.
Return to Default
Rules
Click Restore to Default Rules to delete all the self-
defined settings.
Adding or Editing access rules
Click Add or Edit to enter Access Rules configuring page.
NOTE Remember to click Save to save your settings before leaving the page.
You can also click Cancel to leave without any change.
Services (Both IPv4 and IPv6)