Need help?Do you have a question about the Linksys LGS108P and is the answer not in the manual?
General| Switch layer | - |
|---|---|
| Quality of Service (QoS) support | Yes |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-T, 10BASE-T |
| MAC address table | 8000 entries |
| Certification | FCC Class A, CE |
| Product color | Black |
| LED indicators | Activity, Link, PoE |
| Input current | 1.2 A |
| Input voltage | 54 V |
| Power consumption (typical) | 7 W |
| Total Power over Ethernet (PoE) budget | 50 W |
| Power over Ethernet (PoE) ports quantity | 4 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 104 mm |
|---|---|
| Width | 210 mm |
| Height | 25 mm |
| Weight | 556 g |
Informs users about their consumer rights related to the warranty.
Details the scope of the manufacturer's warranty.
Details the scope of the manufacturer's warranty for AU/NZ.
Details the scope of the manufacturer's warranty for EMEA/LATAM.
To Next Page
