Do you have a question about the Linksys LGS116P and is the answer not in the manual?
Switch type | Unmanaged |
---|---|
Switch layer | - |
Quality of Service (QoS) support | Yes |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Basic switching RJ-45 Ethernet ports quantity | 16 |
10G support | No |
Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
Throughput | 1.488 Mpps |
MAC address table | 8000 entries |
Input current | 1.66 A |
Power consumption (typical) | 11.31 W |
Number of power supply units | 1 |
Certification | FCC Class A, CE |
Product color | Black |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 10 - 90 % |
Total Power over Ethernet (PoE) budget | 80 W |
Power over Ethernet plus (PoE+) ports quantity | 8 |
Depth | 120 mm |
---|---|
Width | 280 mm |
Height | 25 mm |
Weight | 822 g |