EasyManuals Logo

Linksys LGS116P Frequently Asked Questions

Linksys LGS116P
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TABLE
OF CONTENTS
1. What is the Linksys LGS116P Switch?
2. What is PoE?
3. What kind of devices can be connected to the switch?
4. What should I do when my computer cannot connect to the Internet while
connected to the switch?
5. What is the advantage of having a switch when it comes to data transfer?
6. What is the maximum PoE power budget for each PoE switch?
7. What are the protocols supported by the LGS116P?
8. Can I wall-mount my switch?
9. What should I do if my switch experiences excessive data collisions?
10. Can I use a switch to share Internet connection to all computers in the
network?
11. Which ports on my PoE switch can I plug in a PoE device?
12. How is port PoE prioritization done?
13. What is the warranty period for the Linksys LGS116P?
14. What are the supported PoE standards?
15. My PoE device is not powering ON, what should I do?
1. What is the Linksys LGS116P Switch?
The Linksys LGS116P is a 16-Port Gigabit PoE Switch. This unmanaged switch offers
a quick and easy solution to extend your office network with a plug-and-play
installation. It is also useful in transferring data across a local network at up to Gigabit
speeds.
2. What is PoE?
Power over Ethernet (PoE) is a technology that enables an Ethernet network cable to
deliver both data and power.
3. What kind of devices can be connected to the switch?
You can connect the following devices to your LGS116P switch:
LGS116P Frequently Asked Questions

Other manuals for Linksys LGS116P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys LGS116P and is the answer not in the manual?

Linksys LGS116P Specifications

General IconGeneral
Switch typeUnmanaged
Switch layer-
Quality of Service (QoS) supportYes
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity16
10G supportNo
Networking standardsIEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Throughput1.488 Mpps
MAC address table8000 entries
Input current1.66 A
Power consumption (typical)11.31 W
Number of power supply units1
CertificationFCC Class A, CE
Product colorBlack
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Total Power over Ethernet (PoE) budget80 W
Power over Ethernet plus (PoE+) ports quantity8
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width280 mm
Height25 mm
Weight822 g

Related product manuals