Linksys LGS116P Frequently Asked Questions

Computers
Routers
Switches
Network Printers
Other network devices
4. What should I do when my computer cannot connect to the Internet while
connected to the switch?
Follow the steps provided below to resolve this issue:
Verify if LEDs are properly lit on the switch.
System LED - Blue
Link/Act/GB – Green-Amber
PoE Max - Amber
PoE - Green
Power down everything and power ON the switch first. Next, power ON the
computer.
NOTE: Only routers or modems with DHCP capabilities can allow sharing of Internet
connection between computers.
5. What is the advantage of having a switch when it comes to data transfer?
The switch acts as a repeater which regenerates data signals as they pass through it.
This feature acts as a safeguard to deter data loss and ensure that transmissions arrive
securely at their destinations. Moreover, a switch is capable of intelligent filtering of
data based on source and destination as compared to the repeater which can only
regenerate the signal without checking its recipients.
6. What is the maximum PoE power budget for each PoE switch?
The Linksys LGS116P has 80 Watts dedicated PoE power budget for the entire switch.
7. What are the protocols supported by the LGS116P?
The Linksys LGS116P switch is compliant with IEEE 802.3, 802.3u, 802.3x, 802.3ab,
and 802.3az standards.
8. Can I wall-mount my switch?
Yes, the Linksys LGS116P can be wall-mounted.
9. What should I do if my switch experiences excessive data collisions?

Linksys LGS116P Specifications

General

Switch type	Unmanaged
Switch layer	-
Quality of Service (QoS) support	Yes
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Throughput	1.488 Mpps
MAC address table	8000 entries
Input current	1.66 A
Power consumption (typical)	11.31 W
Number of power supply units	1
Certification	FCC Class A, CE
Product color	Black
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Total Power over Ethernet (PoE) budget	80 W
Power over Ethernet plus (PoE+) ports quantity	8

Weight and Dimensions

Depth	120 mm
Width	280 mm
Height	25 mm
Weight	822 g