Linksys PAP2

Linksys PAP2 Manual Configuration
Copyright © 1999-2006 Go2Call.com, Inc. and/or its suppliers. All rights reserved. “Go2Call” and all associated logos are trademarks, registered as applicable, of Go2Call.com, Inc., and may not be reproduced without Go2Call’s permission. Other product
and company names herein may be the trademarks of their owners. This document is provided “as-is” by Go2Call.com, Inc. for the user’s internal and non-commercial use. Go2Call.com, Inc. does not promise that the information herein is accurate or
complete and all use of such information is solely at the user’s risk. All warranties disclaimed.
page 5 of 7
OPTION 1: Outbound Dialtone (No IVR) Configuration
SIP Port: 5065
Proxy: sip02.go2call.com
Outbound Proxy: sipnt.go2call.com:5070
Register: no
Make Calls without Reg: yes
Use Outbound Proxy: yes
Use Outbound Proxy in Dialog: yes
Display Name: Type Your Name
User ID: Type in Go2Call PIN
Password: Not necessary
Use Auth ID: yes
Auth ID: Type in Go2Call PIN
Preferred Codec: G729a (or G723 if you want to use two ports simultaneously)
Dial Plan: Leave the factory default value. Do not touch this field.
OPTION 2: Outbound IVR Configuration requiring user to enter PIN # and destination #
SIP Port 5065
Proxy voip02.go2call.com
Outbound Proxy sipnt.go2call.com:5070
Register no
Make Calls without Reg: yes
Use Outbound Proxy: yes
Use Outbound Proxy in Dialog: yes
Display Name Type Your Name
User ID 1234
Password: Not necessary
Use Auth ID yes
Auth ID 1234
Preffered Codec G729a (or G723 if you want to use two ports simultaneously)
Dial Plan For English IVR type: S0:723
For French IVR type: S0:999
For Spanish IVR type: S0:333
For Polish IVR type: S0:666