Linksys PAP2 Manual Configuration
Copyright © 1999-2006 Go2Call.com, Inc. and/or its suppliers. All rights reserved. “Go2Call” and all associated logos are trademarks, registered as applicable, of Go2Call.com, Inc., and may not be reproduced without Go2Call’s permission. Other product
and company names herein may be the trademarks of their owners. This document is provided “as-is” by Go2Call.com, Inc. for the user’s internal and non-commercial use. Go2Call.com, Inc. does not promise that the information herein is accurate or
complete and all use of such information is solely at the user’s risk. All warranties disclaimed.
page 6 of 7
OPTION 3: Outbound IVR Configuration, requiring user to enter only destination #
SIP Port: 5065
Proxy: voip02.go2call.com
Outbound Proxy: sipnt.go2call.com:5070
Register: no
Make Calls without Reg: yes
Use Outbound Proxy: yes
Use Outbound Proxy In Dialog: yes
Display Name: Type Your Name
User ID: Type Your Go2Call PIN
Password: Not necessary
Use Auth ID: yes
Auth ID: Type Your Go2Call PIN
Preffered Codec: G729a (or G723 if you want to use two ports simultaneously)
Dial Plan: For English IVR type: S0:723
For French IVR type: S0:999
For Spanish IVR type: S0:333
For Polish IVR type: S0:666
OPTION 4: Inbound/Outbound Configuration with full calling features enabled
SIP Port: 5065
Proxy: If you use the US PoP, use pbx02us.go2call.com
“ “ Brazil PoP, use pbx01br.go2call.com
“ “ Singapore PoP, use pbx01ap.go2call.com
Outbound Proxy: If you use the US PoP, use alg02us.go2call.com:5070
“ “ Brazil PoP, use alg01br.go2call.com:5070
“ “ Singapore PoP, use alg01ap.go2call.com:5070
Register: yes
Make Calls without Reg: no
Use Outbound Proxy: yes
Use Outbound Proxy in Dialog: yes
Display Name: Type Your Name
User ID: Type in Go2Call VDID
Password: Auth_code
Use Auth ID: yes
Auth ID: Type in Go2Call VDID
Preffered Codec: G729a (or G723 if you want to use two ports simultaneously)
Dial Plan: Leave the factory default value. Do not touch this field.
To Next Page
Loading...
