PRODUCT DATA
SPA2102
Model No.
Security
Provisioning,
Administration &
Maintenance:
Physical Interfaces:
Subscriber Line
Interface Circuit
(SLIC):
Regulatory
Compliance:
Power Supply:
Indicator Lights/LED:
Documentation:
Dimensions
Unit Weight
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
Flexible Dial Plan Support with Interdigit Timers and IP Dialing
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
Full Duplex Audio
Echo Cancellation (G.165/G.168)
VAD - Voice Activity Detection with Silence Suppression
Attenuation / Gain Adjustments
Flash Hook Timer
MWI - Message Waiting Indicator Tones
VMWI - Visual Message Waiting Indicator via FSK
Polarity Control
Hook Flash Event Signaling
Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
Music on Hold Client
Streaming Audio Server - up to 10 sessions
Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
Up to 256-bit AES Encryption
Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records - Per Line Configurable
Per Line and Purpose Configurable Syslog and Debug Options
2 100baseT RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
Ring Voltage: 40-55 VRMS Configurable *
Ring Frequency: 10 Hz - 40 Hz *
Ring Waveform: Trapezoidal and Sinusoidal *
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics:
On-hook voltage (tip/ring): -50 V NOMINAL
Off-hook current: 25 mA min
Terminating Impedance: 8 Configurable Settings including
North America 600 ohms, European CTR21
FCC (Part 15, Class B) , CE, ICES-003
Switching Type (100-240v) Automatic
DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 5 Watts
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Power, Internet, Phone 1, Phone 2
Quick Installation, User, and Configuration Guides are downloaded from
www.linksys.com
Administration Guide - Service Providers Only
Provisioning Guide - Service Providers Only
3.98 x 3.98. x 1.10 in (101 x 101 x 28 mm) W x H x D
5.29 oz (0.15 kg)
32º~113ºF (0º~45ºC)
-13º~185ºF (-25º~85ºC)
10~90% Non-condensing
10~90% Non-Condensing
Specifications
Environmental
To Next Page
Loading...
