Linksys SPA2102 Setup Guide

My Net Fone Australia Pty Ltd, Address Level 2, 10-14 Waterloo St, Surry Hills NSW 2010
Updated: November 2011
Page 1 of 3
VoIP Setup Guide for Linksys (Cisco) SPA2102
1. Connect a telephone handset to the Phone 1 port
Check the IP Address of the phone adapter:
2. Press **** (i.e. press the star key four times)
3. Wait until you hear the response “Linksys configuration menu—please enter the option
followed by the # (pound) key or hang up to exit”
4. Enter 110#
5. The IP address will be read out -please note it down
6. Open your web browser (e.g. Internet Explorer, Mozilla Firefox, Google Chrome, etc)
7. Enter the IP address in the address bar
8. On the top right side of the window, click on Admin Login
9. Click on advanced, to the right of Admin Login

Linksys SPA2102 Specifications

General

Ports	1 x RJ-45 10/100 Ethernet, 1 x RJ-11 FXS
Voice Protocol	SIP
Network Protocols	RTP, ARP, ICMP, DNS, DHCP, HTTP
Voice Codecs	G.711, G.726, G.729A
QoS	Yes
Security	Password protected system
Power Supply	5V DC, 2A
Operating Temperature	0°C to 40°C
Humidity	10% to 90% noncondensing