Linksys SPA2102 Setup Guide

My Net Fone Australia Pty Ltd, Address Level 2, 10-14 Waterloo St, Surry Hills NSW 2010
Updated: November 2011
Page 3 of 3
21. For Preferred Codec - select G729a
22. For Dial Plan - enter the following:
(*xx.|000S0|121S0|151S0|181S0|[2-
9]xxxxxxxS0|0[23478]xxxxxxxxS0|0011xxx.|1800xxxxxxS0|1300xxxxxxS0|13[1-
9]xxxS0|<#0,:>xxx.<:@gw0>|xxx.)
To setup Phone port 2 - click on Line 2 and follow the steps from 12- 22.
23. Click on Save Settings

Linksys SPA2102 Specifications

General

Ports	1 x RJ-45 10/100 Ethernet, 1 x RJ-11 FXS
Voice Protocol	SIP
Network Protocols	RTP, ARP, ICMP, DNS, DHCP, HTTP
Voice Codecs	G.711, G.726, G.729A
QoS	Yes
Security	Password protected system
Power Supply	5V DC, 2A
Operating Temperature	0°C to 40°C
Humidity	10% to 90% noncondensing