• For most home networks, using WPA2 Personal security mode is recommended.
IMPORTANT: When WAP300Ns are networked in Wireless Bridge mode, all wireless settings, including
wireless band, channel, channel width, security mode and security passphrase/key, are required to be
the same on all the networked WAP300N units.
Depending on what security mode you have selected, you will be asked to enter additional information
to complete the settings. Once you have filled in all the required information, click Save Settings to
apply your changes, or click Cancel Changes to cancel your changes.
Security Mode
Additional
Information Required
Description
WPA2/WPA Mixed Mode,
WPA2 Personal,
WPA Personal
Passphrase
Enter a passphrase of 8-63 characters.
Also support 64 hex.
WPA2/WPA Enterprise Mixed
Mode,
WPA2 Enterprise,
WPA Enterprise
RADIUS Server Enter the IP Address of the RADIUS server.
RADIUS Port
Enter the port number of the RADIUS server.
The default is 1812.
Shared Key
Enter the key shared between the Router and
the server.
WEP
Encryption
Select a level of WEP encryption, 40 / 64-bit (10
hex digits) or 104 / 128-bit (26 hex digits). The
default is 40 / 64-bit (10 hex digits).
Key 1
Enter the WEP key of your network. Key 1 is
the transmit key used by this device.
RADIUS
RADIUS Server Enter the IP Address of the RADIUS server.
RADIUS Port
Enter the port number of the RADIUS server.
The default is 1812.
Shared Key
Enter the key shared between the Router and
the server.
Encryption
Select a level of WEP encryption, 40 / 64-bit (10
hex digits) or 104 / 128-bit (26 hex digits). The
default is 40 / 64-bit (10 hex digits).
Key 2
Enter the WEP key of your network.
the transmit key used by this device.
To Next Page
Loading...
