Need help?Do you have a question about the Linksys Instant Wireless Series WAP54G and is the answer not in the manual?
General| Wireless Standard | 802.11g |
|---|---|
| Frequency Band | 2.4 GHz |
| Data Transfer Rate | 54 Mbps |
| Ethernet Ports | 1 x 10/100 Mbps |
| Security Features | WEP, WPA, WPA2 |
| Humidity | 10% to 85% Non-condensing |
| LED Indicators | Power, Wireless |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Antenna | 2 x detachable |
| Weight | 0.29 kg (0.64 lbs) |
Device compliance with Class B digital device specifications, subject to two conditions for operation.
Compliance with FCC and ANSI C95.1 RF exposure limits for antennas, requiring minimum separation distances.
Applies to Class B digital apparatus, ensuring compliance with Canadian standards.
Declares product conformity to EU directives for safety and EMC, specifying standards for 5 GHz access points.
Overview of the 54Mbps Wireless-G standard and its benefits over Wireless-B.
Highlights key features including high-speed, interoperability, advanced security, and warranty.
Describes wireless LAN configurations, including Basic Service Set (BSS) and infrastructure mode.
Explains roaming capabilities in Extended Service Set (ESS) and factors for optimal performance.
Details the ports and the reset button located on the back panel of the access point.
Describes the LEDs and their functions on the front panel for status indication.
To Next Page
