Need help?Do you have a question about the Linksys LAPAC1750 and is the answer not in the manual?
General| Modulation | - |
|---|---|
| Frequency band | 2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz |
| Channels quantity | 11 channels |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3at, IEEE 802.3u |
| Wi-Fi data rate (max) | 500 Mbit/s |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1000 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Internal | No |
| Placement | Ceiling, Wall |
| Certification | FCC, CE, IC |
| Product color | White |
| Cable lock slot type | Kensington |
| Supported network protocols | IPv6 |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | 802.1x RADIUS, WDS, WEP, WPA, WPA2 |
| Number of SSID supported | 16 |
| Antenna features | Integrated antenna |
| Input current | 1.5 A |
| AC input voltage | 12 V |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Depth | 243.08 mm |
|---|---|
| Width | 236.98 mm |
| Height | 43.69 mm |
Lists package contents and describes physical features like LEDs and ports.
Provides instructions for wall and ceiling installation of the access point.
Guides users through the browser-based setup process.
Explains how to use the setup wizard for initial configuration.
Covers user accounts, time settings, log settings, and management access.
Configures LAN settings, network setup, VLANs, and advanced network options.
Sets up wireless radios, SSIDs, security, WDS, and Workgroup Bridge.
Configures captive portal for secured internet access and customizes its appearance.
Manages access point clusters for centralized administration and channel assignments.
Displays overall system summary and detailed LAN interface status.
Shows the status of wireless radios, SSIDs, WDS, and Workgroup Bridge connections.
Covers firmware updates and configuration backup/restore procedures.
Restores factory defaults and reboots the access point.
Provides tools for network diagnostics like ping and packet capture.
Addresses common problems like finding the access point or connecting to the LAN.
Explains wireless network terminology, modes, SSIDs, channels, and WEP.
Guides on configuring clients for WEP, WPA2-PSK, WPA2-Enterprise, and 802.1x.
Details setting up a Windows 2000 server for 802.1x authentication.
To Next Page