Linksys LAPAC1750PRO

L APAC1750 PRO
User Guide

Linksys LAPAC1750PRO Specifications

General

Modulation	-
VLAN support	Yes
Frequency band	2.4, 5 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1750 Mbit/s
Internal	No
Certification	FCC, CE, IC
Product color	White
Cable lock slot type	Kensington
Ethernet LAN (RJ-45) ports	2
Security algorithms	802.1x RADIUS, WEP, WPA, WPA2
Antenna gain level (max)	5.2 dBi
Input current	2 A
AC input voltage	12 V
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	238 mm
Width	247 mm
Height	43.3 mm
Weight	520 g

Summary

Section 1: Getting Started

Administrators Computer Requirements

Specifies minimum requirements for the administrator's computer for AP configuration via Web UI.

Installing the Access Point

Step-by-step guide on connecting the AP to a PC and powering it on for initial configuration.

Configuring the Ethernet Settings

Details how to configure Ethernet settings, including DHCP and VLAN information, on the access point.

Configuring IEEE 802.1 X Authentication

Explains how to configure 802.1X authentication information for APs on networks using port-based access control.

Configuring Security on the Wireless Access Point

Describes how to configure security settings for each virtual access point (VAP) to control wireless client access.

Section 3: Configuring the Access Point

System Settings

LAN

Wireless

Covers wireless features including Radio, Rogue AP Detection, Virtual Access Points (VAPs), Scheduler, and QoS.

Security

Configures security modes for VAPs, including None, Static WEP, IEEE802.1X, WPA Personal, and WPA Enterprise.