19
Section 3: Configuring the Access Point
LAPAC1750PRO Access Point Software User Manual
Section 3: Configuring the
Access Point
• Administration
• LAN
• Wireless
• Security
• QoS and Access Control
• SNMP
• Captive Portal
• Cluster
Administration
This section describes how to set up your access point and perform diagnostics.
Use the tabs under the Configuration heading on the Administration Web UI.
• System Settings
• Time Settings
• Log Settings
• Email Alert
• Management Access
• HTTP/HTTPS Service
• Discovery - LLDP
• Discovery - Bonjour
System Settings
From the System Settings page, you can change the administrator password and
system settings e.g. device name, system contact. We strongly recommended
you choose a new password based on the standard guidelines for strong
password security instead of using default password, which is ”admin”. Figure 13
shows the System Settings page.
Figure 13: System Settings
Table 15: System Settings page
Field Description
New Password Enter a new administrator password. The characters you
enter are displayed as bullets to prevent others from
seeing your password as you type.
The password can be up to 32 characters. Do not use
special characters or spaces.
Note: As an immediate first step in securing your
wireless network, we recommend that you change the
administrator password from the default.
Confirm New
Password
Re-enter the new administrator password to confirm that
you typed it as intended.
To Next Page
Loading...
