Linksys WAP54GPE User Manual

A Division of Cisco Systems, Inc.
®
Model No.
Exterior Access Point
Wireless-G
WAP54GPE
User Guide
WIRELESS
GHz
2.4
802.11g

Linksys WAP54GPE Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Ports	1 x 10/100 Ethernet
Power over Ethernet	Yes
Security	WEP, WPA, WPA2
Operating Humidity	10% to 85% (non-condensing)
Storage Humidity	5% to 90% (non-condensing)
Wireless Standard	IEEE 802.11g
Modulation	BPSK, QPSK, CCK, OFDM
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C

Summary

Chapter 1: Introduction

Chapter 2: Planning Your Wireless Network

Chapter 3: Getting to Know the Wireless-G Exterior Access Point

Front Panel LEDs

Ports and Connections

Reset Button and Grounding

Chapter 4: Connecting the Wireless-G Exterior Access Point

Overview and Hardware Installation

Provides instructions for mounting the Access Point and connecting it to the network.

Chapter 5: Setting Up the Wireless-G Exterior Access Point

Setup Wizard Process

Guides users through the step-by-step configuration using the Setup Wizard.

Chapter 6: Configuring the Wireless-G Exterior Access Point

Accessing and Navigating the Utility

Setup Tab Configuration

Wireless Settings

Covers basic wireless settings, security (WEP, WPA), network access, and advanced wireless options.

AP Mode Operation

Explains different operating modes like Access Point, Wireless Repeater, and Wireless Bridge.

Administration Settings

Status Monitoring

Appendix A: Troubleshooting

Frequently Asked Questions

Addresses common issues, standards, and setup questions for the Access Point.

Appendix B: Wireless Security

Security Precautions and Threats

Provides security recommendations, threats, and details on WEP and WPA encryption.

Appendix C: Upgrading Firmware

Firmware Upgrade Procedure

Outlines the steps required to download and install new firmware for the Access Point.

Appendix F: Specifications

Device Specifications