Need help?Do you have a question about the Linksys WAP54G and is the answer not in the manual?
General| I/O ports | 1 x 10/100 Auto-Cross Over (MDI/MDI-X), power |
|---|---|
| Indoor range | 100 m |
| Outdoor range | 450 m |
| Connectivity LEDs | Yes |
| Networking features | LAN, WLAN, VPN |
| Compliance industry standards | IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u |
| Security algorithms | WEP, WPA |
| Minimum system requirements | Internet Explorer 4.0, Netscape Navigator 4.7 CD-ROM 802.11b, 802.11g Wireless Adapter w TCP/IP Network Adapter w Ethernet Network Cable & TCP/IP, Minimum processor: 200 MHz, 64 MB RAM |
| Compatible operating systems | Windows 98SE, Me, 2000, XP |
| Frequency band | 2.4 GHz |
| Number of users | 256 user(s) |
| Maximum data transfer rate | 54 Mbit/s |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Internal | No |
| Certification | FCC |
| AC input voltage | 12 V |
Weight and Dimensions| Weight | 460 g |
|---|---|
| Dimensions (WxDxH) | 186 x 169 x 48 mm |
Instructions on physically connecting the Access Point for initial setup.
Step-by-step guide for configuring the Access Point using the setup wizard.
Steps to set up the Linksys Wireless Guard security service.
Configuration of essential wireless parameters like SSID and channel.
Settings for securing the wireless network using WEP, WPA, or WPA2.
Common questions and answers related to troubleshooting the Access Point.
Recommendations for securing a wireless network against threats.
To Next Page
