Linksys LAPAC1750 - Factory Default and Reboot

Factory Default
To restore your access point to its factory defaults,
select an option and click Save.
•
Reset Parameters that can share with
Slaves ONLY
When current AP is a master of a cluster,
select this option to restore all sharable
parameters of current AP and its slaves to
factory defaults. Cluster settings and non-
sharable parameters will not reset.
•
Reset All Parameters to Factory Default
•
No
Don’t restore to factory defaults.
Reboot
Go to Maintenance > Maintenance > Reboot to power cycle the device. The current configuration
file will remain after reboot.
94