Linksys LAPAC1750 User Manual

Export/Restore to/from Local PC
Export SSL
Certificate
Click to export the SSL certificate.
Install Certificate
Browse to choose the certificate file. Click
Install
Certificate.
Export to TFTP Server
Destination File
Enter the name of the destination file.
TFTP Server
Enter the IP address for the TFTP server. Only support
IPv4 address here.
Export
Click to export the SSL certificate to the TFTP server.
Restore from TFTP Server
Source File
Enter the name of the source file.
TFTP Server
Enter the IP address for the TFTP server. Only support
IPv4 address here.
Install
Click to install the file to the device.
LAN
Network Setup
Go to Configuration > LAN > Network Setup to configure basic device settings, VLAN settings
and settings for the LAN interface, including static or dynamic IPv4/IPv6 address assignment.
21

Linksys LAPAC1750 Specifications

General

Modulation	-
Frequency band	2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Channels quantity	11 channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3at, IEEE 802.3u
Wi-Fi data rate (max)	500 Mbit/s
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Quality of Service (QoS) support	Yes
Internal	No
Placement	Ceiling, Wall
Certification	FCC, CE, IC
Product color	White
Cable lock slot type	Kensington
Supported network protocols	IPv6
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Security algorithms	802.1x RADIUS, WDS, WEP, WPA, WPA2
Number of SSID supported	16
Antenna features	Integrated antenna
Input current	1.5 A
AC input voltage	12 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	243.08 mm
Width	236.98 mm
Height	43.69 mm