Wireless-G Router for 3G/UMTS Broadband
Figure 5-16: Configure Wireless Security Settings - WPA2-Personal Screen 25
Figure 5-17: Configure Wireless Security Settings - WPA-Personal Screen 26
Figure 5-18: Configure Wireless Security Settings - WEP (128-Bit) Screen 26
Figure 5-19: Confirm New Settings Screen 27
Figure 5-20: Congratulations Screen 27
Figure 6-1: Setup Wizard’s Welcome - Language Selection Screen 28
Figure 6-2: Setup Wizard’s Welcome - Start Wizard Screen 29
Figure 6-3: Select Service Screen 29
Figure 6-4: Disconnect the Modem from the Computer Screen 30
Figure 6-5: Connect the Modem to the Router Screen 30
Figure 6-6: Connect the Router to a Computer Screen 31
Figure 6-7: Connect the Router to a Computer Screen, continued 31
Figure 6-8: Power on the Router Screen 32
Figure 6-9: Check the Router’s Status Screen 32
Figure 6-10: Configure Cable or DHCP Settings Screen 33
Figure 6-11: Configure DSL (PPPoE) Settings Screen 33
Figure 6-12: Enter Static IP Address Settings Screen 34
Figure 6-13: Confirm New Settings Screen 34
Figure 6-14: Set the Router’s Password Screen 35
Figure 6-15: Wireless Settings Screen 35
Figure 6-16: Configure Wireless Security Settings Screen 36
Figure 6-17: Warning about Disabled Wireless Security Screen 36
Figure 6-18: Configure Wireless Security Settings - WPA-Personal Screen 37
Figure 6-19: Configure Wireless Security Settings - WEP (128-Bit) Screen 37
Figure 6-20: Configure Wireless Security Settings - WPA2-Personal Screen 38
Figure 6-21: Confirm New Settings Screen 38
Figure 6-22: Congratulations Screen 39
Figure 7-1: Setup Wizard’s Welcome - Language Selection Screen 41
Figure 7-2: Setup Wizard’s Welcome - Start Wizard Screen 41
Figure 7-3: Select Service Screen 42
Figure 7-4: Insert Vodafone Mobile Connect Card Screen 42
Figure 7-5: Disconnect the Modem from the Computer Screen 43
Figure 7-6: Connect the Modem to the Router Screen 43
Figure 7-7: Connect the Router to a Computer Screen 44
To Next Page
Loading...
