Proceed to “Chapter 6: Setting Up and Configuring the Router.”
There are three ways to place the Wireless-N Router. The first way is to place it
horizontally on a surface, so it sits on its four rubber feet. The second way is to stand the
Wireless Router vertically on a surface. The third way is to mount it on a wall. The stand
and wall-mount options are explained in further detail below.
Stand Option
1. 1. Locate the Router’s left side panel.
2. 2. The Router includes two stands. With the two large prongs facing outward, insert the
short prongs into the little slots in the Router, and push the stand upward until it snaps into place.
Repeat this step with the other stand.
Now that the hardware installation is complete, proceed to “Chapter 6: Setting up and
Configuring the
Wireless-N Router,” for directions on how to set up the Wireless-N Router."
Figure 5-5: The Stand Option
To Next Page
Loading...
