EasyManua.ls Logo

Linksys WRVS4400N

Linksys WRVS4400N
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
may need to enter additional information in order to connect to the Internet through an
ISP (Internet Service Provider) or broadband (DSL, cable modem) carrier.
Summary
System Information
Firmware version Displays the Routers current software version.
CPU Displays the Router’s CPU type.
System up time
Displays the length of time that has elapsed since the Router was last
reset.
DRAM Displays the amount of DRAM installed in the Router.
Flash
Displays the amount of flash memory installed in.
Port Statistics
This section displays the following color-coded status information on the Router’s
Ethernet ports:
Green Indicates that the port has a connection.
Black Indicates that the port has no connection.
Network Setting Status
LAN IP
Displays the IP address of the Routers LAN interface.
WAN IP Displays the IP address of the Router’s WAN interface. If this address was
assigned using DHCP, click DHCP Release to release the address, or click DHCP Renew
to renew the address.
Mode Displays the operating mode, Gateway or Router.
DNS 1-2 The IP addresses of the Domain Name System (DNS) server(s) that the Router
is using.
DDNS Indicates whether the Dynamic Domain Name System (DDNS) feature is enabled.
DMZ Indicates whether the DMZ Hosting feature is enabled.

Other manuals for Linksys WRVS4400N

Related product manuals