Firewall Setting Status
DoS (Denial of Service) Indicates whether the DoS Protection feature is enabled to block
DoS attacks.
Block WAN Request Indicates whether the Block WAN Request feature is enabled.
Remote Management Indicates whether the Remote Management feature is enabled.
IPSec VPN Setting Status
IPSec VPN Summary Click the IPSec VPN Summary hyperlink to display the VPN >
Summary screen.
Tunnel(s) Used Displays the number of VPN tunnels currently being used.
Tunnel(s) Available Displays the number of VPN tunnels that are available.
Log Setting Status
E-mail If this displays Email cannot be sent because you have not specified an outbound
SMTP server address, then you have not set up the mail server. Click the E-mail
hyperlink to display the Administration > Log screen where you can configure the SMTP
mail server.
To Next Page
Loading...
