Linksys X1000 User Manual

15
Advanced Configuration
Linksys X1000
WPA2/WPA Mixed Mode
NOTE
If you select WPA2/WPA Mixed Mode as your Security Mode, each
device in your wireless network MUST use WPA2/WPA and the
same passphrase.
Passphrase Enter a passphrase of 8-63 characters. The default is password. If
you used the setup software for installation, then the default is changed to a
unique passphrase.
WPA2 Personal
NOTE
If you select WPA2 Personal as your Security Mode, each device
in your wireless network MUST use WPA2 Personal and the same
passphrase.
Passphrase Enter a passphrase of 8-63 characters. The default is password. If
you used the setup software for installation, then the default is changed to a
unique passphrase.
WPA Personal
NOTE
If you select WPA Personal as your Security Mode, each device
in your wireless network MUST use WPA Personal and the same
passphrase.
Passphrase Enter a passphrase of 8-63 characters. The default is password. If
you used the setup software for installation, then the default is changed to a
unique passphrase.
WPA2/WPA Enterprise Mixed Mode
This option features WPA2/WPA used in coordination with a RADIUS server.
(This should only be used when a RADIUS server is connected to the router.)
NOTE
If you select WPA2/WPA Enterprise Mixed Mode as your Security
Mode, each device in your wireless network MUST use WPA2/WPA
Enterprise and the same shared key.
RADIUS Server Enter the IP address of the RADIUS server.
RADIUS Port Enter the port number of the RADIUS server. The default is 1812.
Shared Key Enter the key shared between the router and the server.

Linksys X1000 Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11n
Rack mounting	No
Frequency band	2.4 GHz
WLAN data transfer rates supported	300 Mbit/s
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	3
DHCP client	-
Supported network protocols	IPv6
Antennas quantity	2
Security algorithms	WPA2
Product color	Black
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Weight	- g