6. Time
6.1 Time
- It displays the current system time when an available channel was saved.
Auto Sync: turn on/off auto synchronization. If it’s off, you can see and adjust date and time
using navigation buttons.
Time Zone: select correct time zone.
Daylight Savings: When auto sync is enabled, you can see and turn on/off Daylight
Savings.
6.2 On Time
On Time: set the hour, minute and day using navigation buttons.
Input Source: select power on input source.
DTV Channel Type: select DTV channel type.
Channel: select the channel.
Volume: adjust the volume.
6.3 Off Time
Off Time: set the hour, minute and day using navigation buttons.
6.4 Sleep Timer
- Set the automatic sleep time.
Available options: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min.
6.5 Auto Standby
- Select a desired Auto Sleep (standby) duration when no operations are done through the
remote control.
Available options: Off, 3/4/5 hours.
6.6 OSD Timer
- Select a desired OSD menu duration.
Available options: Never, 10/20/30/60 seconds.
To Next Page
Loading...
