● The unit contains different setting menus. Once the initial programming is entered, it will
be remained in the memory until change, and the unit can always be operated under the
same conditions.
● The settings will be remained in the memory until the settings are changed ever after
setting the player to standby mode.
First Time Installation
- Connect to power source and turn on this TV, welcome page will display on the screen.
- Press LEFT/RIGHT/UP/DOWN navigation buttons on remote control to select an option.
- Press OK button on remote control to confirm selection.
Step 1
- Press OK button on remote control to start setting and select desired on-screen display
language.
Step 2
- Choose the country you are living in and accept the Terms of Use to enter next step.
To Next Page
Loading...
