7.4 HDMI Settings
To use the HDMI CEC function:
- Make sure the HDMI device (Amplifier, etc.) is connected correctly.
- Press the SOURCE button on the remote control to select the HDMI input source.
Note: HDMI ARC in “HDMI 3” only.
HDMI CEC: turn on/off HDMI CEC.
Device Auto Power Off: if this function is enabled, external connected CEC device will
power off automatically when turn off this TV.
TV Auto Power On: if this function is enabled, this TV will power on automatically when
turn on external connected CEC device.
HDMI ARC (Audio Return Channel): if this function is enabled, the users can use external
amplifier or audio decoding device which featured with ARC.
Detect: detect available device.
7.5 Source Rename
- Rename the name of each input source.
7.6 Expert Settings
PVR & Time-Shift Settings: you can select a desired disk, partition, Time-Shift size, format
USB device and check USB speed.
Hearing Impaired: for Hearing Impaired users, this function provides captions to
supplement the audio (Hearing Impaired function works only when you are viewing
programs that contain related caption information)
Network Wake Up: turn on/off Network Wake Up.
Store Mode: turn on/off store (shop) mode.
To Next Page
Loading...
