Linsar LS51DVD - Operation; Power Connection; Playing Discs; Playback Controls

10 | OPERATION
Operation
Connect to power
• Plug in the AC/DC adaptor to the power outlet, and connect the other end to the power input on the unit,
then switch on the power at the outlet. Once the unit is connected to power, the indicator will turn red.
Playing a DVD/VCD/CD
• Press the POWER button on the unit or the STANDBY button on the remote to turn the unit on.
The indicator will turn green.
• Press the OPEN/CLOSE button on the unit or the remote to open the disc tray. Play a disc on the tray
with its label side facing up. Press the OPEN/CLOSE button again to close the disc tray. The unit will start
playing the disc automatically.
• To put the unit into standby, press the POWER button on the unit or the STANDBY button on the remote.
The unit will turn off and enter standby mode and the indicator will turn red.
During playback
• Press the / buttons repeatedly to fast-search backwards or forwards. Press the PLAY/PAUSE button
to resume normal playback.
• Press the / buttons to skip to the previous or next chapter or track.
• Press the PLAY/PAUSE button to pause playback; press it again to resume playback.
• Press the VOLUME +/- buttons to increase or decrease the volume level.