17
Emergency Response Guide
// ACCESSES
6. Activate the pump by using the tubular lever. The latch
hooks will release and the cab will rise.
7. As the cab approaches top dead centre (TDC), pump
slowly. When the cab goes over TDC, stop pumping. The
cab will free fall slowly to full tilt.
Figure 17 ― Hydraulic cab pump mechanism
Figure 18 ― Tubular lever under the hood
To lower the cab, follow the same steps with the selector valve
in the CAB LOWER position.
Figure 19 ― Tilting cab mechanism
To Next Page
Loading...