Lionel BNSF - Adjusting the Volume; Silencing the Diesel Roar

Running your train
15
Adjusting the volume
U
se the volume control knob on the underside of the locomotive to adjust the volume. Refer
to Figure 9. Use a small screwdriver to access the volume control knob.
Silencing the diesel roar
T
o silence the diesel roar, slide the SOUND switch on the underside of the car to the OFF posi-
tion. The user-activated horn and bell are not silenced. Refer to Figure 9 for the location of
the switch.
Figure 9. Volume control knob and switch locations
ON
DIR
OFF
ON
OFF
SOUND
Front of engine
Rear of engine
Volume Control Knob
73-0154-250 BNSF.indd 15 10/26/10 5:10 PM