Lionel Trainmaster Command - Connect the Base communication wire

4
Connect the Base communication wire
3
3
Connect one end of a wire to the
Command Base binding post.
Connect the other end to either:
• the U (common) binding post on
ALL PowerMaster(s)/Lionel
ZW transformer(s) powering
your Lionel railroad; or
• the outside rail(s)* of your
three-rail track.
* If you use Lionel sectional
track, connect the wire to one
outside rail. If you use hi-rail
track, connect the wire to both
outside rails.
COMMON
U
A
C
O
M
P
U
TE
R
B
A
S
E
P
W
R
TR
A
C
K
U