Need help?Do you have a question about the Lionel FM TrainMaster and is the answer not in the manual?
General| Power Supply | AC |
|---|---|
| Control | Wireless |
| Scale | O Scale |
| Control System | TrainMaster Command Control (TMCC) |
| Dimensions | Varies by version |
Steps to operate the locomotive using the LEGACY Control System.
Steps to operate the locomotive using TrainMaster Command Control.
Steps to operate the locomotive using a standard AC transformer.
Initial steps to prepare the locomotive for operation in the LEGACY system.
Instructions for powering the track for LEGACY system operation.
Procedure to address the locomotive with the LEGACY CAB-2 controller.
How to start the locomotive's sound system and access the control panel.
Description of the buttons and functions of the LEGACY CAB-2 remote controller.
How to use the velocity throttle knob to control locomotive speed.
Using the multi-controller for direction, boost, and brake commands.
How to use the train brake slider to slow down and limit speed.
Operating the whistle and bell using the warning sound controller.
Selecting official railroad speeds using the speed bar on the touch screen.
Description of the command reverse unit, smoke, RailSounds, and Odyssey switches.
Step-by-step guide to operating the locomotive in Command Control mode.
Detailed explanation of CAB-1 remote controller buttons and their functions.
Specific commands accessed via the AUX1 button and numeric keypad.
Summary table of CAB-1 numeric keypad functions with AUX1 modifier.
Adjusting RPM levels and other performance settings using the CAB-1 controller.
Further details on tuning performance, including speed adjustment and sound level.
Procedure for assigning a unique ID number to your locomotive.
Steps to couple multiple locomotives together for multi-unit operation.
Procedure to reset the locomotive if it becomes unresponsive to commands.
How to operate the locomotive using a standard AC transformer.
Further details on conventional operation, including direction control and speed adjustment.
How to lock the locomotive into a single direction (e.g., forward only).
How to uncouple locomotives in the conventional environment.
How Odyssey II Speed Control works with the LEGACY Control System.
How Odyssey II Speed Control works with TrainMaster Command Control.
How Odyssey II Speed Control works in conventional transformer operation.
Instructions for installing a nine-volt battery for sound system continuity.
How to use RailSounds features in conventional transformer mode.
Installing buttons to activate horn/bell if transformer lacks controls.
Triggering CrewTalk and TowerCom announcements in conventional mode via horn blasts.
How to use RailSounds features in TrainMaster Command Control mode.
Triggering CrewTalk and TowerCom conversations in Command Control using CAB-1 commands.
Sample dialog script for locomotive's round trip operations.
Proper lubrication points and procedures for the locomotive.
Instructions for adding smoke fluid to the locomotive's smoke unit.
How to select low, medium, or high smoke output using the CAB-1 controller.
Recommendation for replacing locomotive LEDs and lamps.
Procedure for replacing worn traction tires on the locomotive.
To Next Page