3
Table of Contents
VISION Reefer Car basics
VISION Steel-Sided Reefer switch locations 4-5
Opening the roof hatches 6
LEGACY and Command Control remote operations
LEGACY control operations 7
Choosing an ID for your VISION Reefer 7
Setting up your VISION Reefer with your CAB-2 remote 8-11
The LEGACY CAB-2 remote controller 12
TrainMaster Command Control (TMCC) operations 13
Creating a Train with the original (grey) CAB-1 remote 13
Creating a Train with the CAB-1L (blue) remote 14
Operating your VISION Reefer with the CAB-1 or CAB-1L remote 15
CAB-1 remote controller commands 16
Adjusting the volume from your LEGACY remote 17
Adjusting the volume from your CAB-1 or CAB-1L remote 18
Shut down and Start up commands 18
Loading scenarios 1, 2, and 3 19-20
Unloading 21
Loading and Unloading in Conventional Operation only 21
Sound System operations
Freight Sounds 22
Rail Sounds 22
Grind 22
Bump 22
Flat Wheel 22
LEGACY Sound System operations
Train Brake 23
Limited Warranty/Lionel Service 24
To Next Page
Loading...
