Lionelo Aart - Child Seat Adjustment and Installation; Child Seat Inclination Adjustment; Seat Liner and Lumbar Support; Child Seat Installation in Car

‑ 10 ‑EN
HOW TO INCLINE THE CHILD SAFETY SEAT
The child safety seat can be posioned at three inclinaon angles and in the half-lying
posion, suitable if the product is in a rear-facing posion (g. 13). To incline the child safety
seat, grab the lever below the seat and push the product in a desired direcon. Release the
handle to secure the seat in posion.
SEAT LINER AND LUMBAR SUPPORT
The liners are intended for the smallest children, improve their comfort and serve as addional
support. The lumbar support is designed for babies, you can remove it only when the child needs
more space in the child safety seat. The seat liner can be used unl the child’s weight exceeds 13 kg.
HOW TO ASSEMBLE THE CHILD SAFETY SEAT IN THE CAR
GROUP 0+, I (up to 18 kg)
For this weight group, the child safety seat is installed in a rear-facing posion, in a backrest
half-lying posion (g. 14). The child is secured with child safety seat belts. Backrest posion: 4.
1. Place the child safety seat on the car seat. Make sure the product adheres to the car
seat backrest ght (g. 15).
2.
Pull the car belt and carry the shoulder part through a blue guide (11) in the seat backrest. Next
carry the shoulder belt through the belt clamp (12), moving it back with your nger (g. 16a).
3. Carry the lumbar part of the car belt through the blue guide (18) in the base on both
sides of the product (g. 16b).
4. Fasten the belt and ghten it rmly, as much as possible (g. 17a).
5.
Place the child in the child safety seat and secure it with child safety seat belts (g. 17b).
GROUP I (9 - 18 kg)
For this weight group, the child safety seat is installed in a forward-facing posion. The child
is secured with child safety seat belts. Backrest posion: 1, 2, 3.
1. Remove the lumbar support, and seat liner if necessary.
2. Posion the child safety seat on the car seat. Make sure the product adheres to the
car seat backrest ght (g. 18).
3.
Carry the shoulder part of the car belt through the belt clamp (12), moving it away
with your nger (g. 19).
4.
Carry the car belt through a red guide in the base on both sides of the child safety seat (17).
5. Fasten the belt and ghten it as much as possible (g. 20).
6. Place the child in the child safety seat and secure it with child safety seat belts (g. 21).
GROUP II and III (15 - 36 kg)
For this weight group, the child safety seat is installed in a forward-facing posion. The child
is secured with car safety belts. Backrest posion: 1, 2, 3.
1. Detach the ve-point belts of the child safety seat.
2. Place the child safety seat on the car seat. Make sure the product adheres to the car