EasyManua.ls Logo

Lionelo Braam - Seat Adjustments & Rotation; Headrest & Seat Inclination; Seat Rotation Mechanism

Lionelo Braam
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
‑ 12 ‑EN
HOW TO ADJUST THE HEADREST
Loosen the shoulder belts as much as you can.
To change height of the headrest, grab and pull the headrest height adjustment lever (R).
Choose the headrest height you desire. (See: g. 12).
Note! The height of shoulder belts is integrated with the headrest height. A properly set
headrest provides opmal protecon to your child in the child safety seat:
The headrest must be adjusted so that shoulder belts and child’s arms are at the same
level. The belts must not be too high (at the ears level or higher) or too low (e.g. behind
the child’s back). (See: g. 11)
Headrest is too low.
Headrest is too high.
Headrest is adjusted correctly.
HOW TO ROTATE THE CHILD SAFETY SEAT
To take the child out or place the child in the child safety seat comfortably:
Pull out the base 360° rotaon buon (M).
Next rotate the child safety seat in any direcon (360°).
When you can hear a disncve „click”, it means the child safety seat has been secured
as desired. Then you can be sure the product is safe. (See: g. 13)
Note! Make sure the base rotaon buon is secured in its place aer changing direcon
of the child safety seat.
Correct posion of the child safety seat in relaon to driving direcon and applicable groups:
a. Rear-facing posion – group 0+, I (0 – 18 kg) (See: g. 14)
b. Forward-facing posion – group I, II, III, (9 – 36 kg) (See: g. 15)
HOW TO ADJUST INCLINATION ANGLE OF THE CHILD SAFETY SEAT
Grab the lever (O), pull up and change inclinaon angle of the child safety seat. (See: g. 16)
You can choose 5 levels of child safety seat inclinaon, depending on the child’s size:
Group 0+, I (0 - 18kg) Group I (9 - 18kg) Group II, III (15 - 36kg)
Posion 5 Posion 1 - 4 Posion 1
To set the child safety seat in posion 5:
Press the base rotaon buon (M), rotate the child safety seat to the rear-facing posion.
Pull the seat lng grip (O) and lt the product to posion 5. It is a half-lying posion
dedicated to small children from group 0+, I (0-18 kg). See: g. 16 and 17
Children from group I (9 - 18 kg) can be in a forward- or rear-facing posion. Suitable
posions of the seat inclinaon for these children are posions 1-5 (1-4 in a forward-
facing posion, 5 in a rear-facing posion). See: g. 17

Related product manuals