Rev: 08.30.21 Page 2 CCD-0004385
TABLE OF CONTENTS
Introduction 2
Safety 2
Resources Required 3
Preparation 4
Installation 6
Wiring 8
Correct order of connection to the batteries 8
Notes 11
Introduction
This document details the installation of Curt® Battery Box.
Note: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
System was designed for Group 24 batteries. Connect the batteries to each other, either Series or Parallel,
depending on battery selection. Connect to OEM supplied breakers that are sized appropriately for the units
electrical needs. Wire per OEM standards.
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury if not performed safely and within the parameters set forth in
this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.
Do NOT reverse-connect battery cables. Reversing the connection of battery cables will cause
an electrical short resulting in an electrical shock, explosion and/or exposure to acidic uids
causing product and/or property damage including severe person injury or death. Connect black,
negative (-) battery cables to the negative (-) battery post and red, positive (+) battery cables to the
positive(+) battery post.
To Next Page
Loading...