Rev: 08.30.21 Page 7 CCD-0004385
Fig. 7
2. Secure the battery box base assembly (Fig. 7A) to trailer frame (Fig. 7B) using 8 #10 self drilling screws
(Fig. 7C) and 2 ground bars (Fig. 7D).
Note: Any one of the 8 screws can be used to ground the batteries to the frame using the small terminal
end of the supplied black ground cable. See Wiring section, reference Fig. 10 as an example.
Note: Connect black grounding cable to your preferred location (Fig. 7D). Be sure to use a star washer or
serrated flange screw on the ground cable connection.
A
B
D
Fig. 8
3. Insert side-box (Fig. 8A) into the opening on the end of the battery box (Fig. 8B) and using a rivet gun,
secure with 8 supplied rivets (Fig 8C).
B
C
C
A
To Next Page
Loading...