Lippert Components Flow Max 719323 User Manual

6
lci1.com 574 - 537- 8900 Rev:0 4.10.18
Flow Max
TM
Galley Faucets
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001241
3. Push the lever in towards the faucet to shut the water off
(Fig.12A).
Pull Down Faucet
1. Pull the lever away from the faucet to turn it on (Fig.13A).
A
2. Move the lever towards you for hot water (Fig.14) and
away from you for cold water (Fig.15).
NOTE: Located on the front of the lever is a “H” for hot
water and a “C” for cold water. Move the lever in the
direction of the desired temperature.
A
right profile
view
right profile
view
3. To use the spray wand pull down and out on the faucet
head.
4. Press and release the button in on the lower portion
of the faucet head (Fig.16A) for spray mode. Press and
release the button again for stream mode.
5. Replace the faucet head by gently guiding the hose back
into the faucet neck and insert into clip, if applicable.
A
Fig.12
Fig.13
Fig.14 Fig.15
Fig.16

Lippert Components Flow Max 719323 Specifications

General

Brand	Lippert Components
Model	Flow Max 719323
Category	Plumbing Product
Language	English