Lippert Components Flow Max 719323 User Manual

7
lci1.com 574 - 537- 8900 Rev:0 4.10.18
Flow Max
TM
Galley Faucets
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001241
Troubleshooting Chart
Vibration caused by driving or transporting can loosen plumbing and hardware. Check for loose system components.
Many symptoms can be resolved by tightening hardware. Use care not to over-tighten. Refer to the chart for
troubleshooting tips.
Maintenance
Clean the faucet periodically with a soft cloth. Avoid
abrasive cleaners, steel wool and harsh chemicals as
these will dull the nish and void the warranty.
6. To shut the water off push the lever in towards the faucet
(Fig.17).
A
What is happening? Why? What should be done?
Irregular Flow Blockage at the screen
1. Unscrew the spray wand assembly.
2. Remove the O-ring and screen.
3. Clean screen by rinsing it for a few
seconds to remove any debris.
4. Reinsert O-ring and screen.
5. Screw the spray wand to the pull
down hose and tighten.
There is a leak from the aerator
when the faucet is on.
The aerator does not fit correctly
on the faucet.
1. Reinstall aerator.
The aerator has irregular
or reduced water flow.
The aerator is dirty. Remove aerator and clear debris.
Fig.17

Lippert Components Flow Max 719323 Specifications

General

Brand	Lippert Components
Model	Flow Max 719323
Category	Plumbing Product
Language	English