Rev: 04.28.21 Page 6 CCD-0004030
8. The ID field will auto populate with the camera's SSID number (Fig. 11A) and the Password field (Fig. 11B)
will be blank. No password is needed at this time. Tap Connect>> (Fig. 11C).
Note: Be sure that the mobile device's Wi-fi is turned on. If Wi-Fi is not on, the app will prompt you to turn
it on.
9. The app will ask to connect the mobile device to a temporary Wi-Fi network. The temporary Wi-Fi
network is the camera. Tap Connect (Fig. 12A).
10. RV Connected Successfully should now be showing on your mobile device. Tap Continue>> (Fig. 13A).
11. Tap Let's Go>> (Fig. 14A) to enter the Year, Make, Model, and Floor Plan of your RV.
Fig. 11
Fig. 12
A
AA
B
C
A
Fig. 13 Fig. 14
To Next Page
Loading...