Lippert Components Lippert Insight - Final Setup and Camera Access

Rev: 04.28.21 Page 7 CCD-0004030
12. Confirm the details entered by tapping Confirm>> (Fig. 15A).
13. Set up a 4-digit security pin for the OneControl app (Fig. 16A).
Note: You can skip the Pin Setup by tapping Skip>> (Fig. 16B ).
14. OneControl app setup is now complete, tap Continue to App>> (Fig. 17A).
15. Tap Camera (Fig. 18A) to open the back-up camera view.
16. The app will now ask you to set up a password for connection to the back-up camera (Fig 19A). Enter a
password that is at 8 characters but no more than 20 characters in length.
17. Tap Update (Fig. 19B).
Fig. 15
B
Fig. 16 Fig. 17
A
Fig. 18 Fig. 19
A
A
A
A
B