Rev: 02.12.19 Page 9 CCD-0001843
ONECONTROL
®
CONNECTANYWHERE
TM
ACTIVATION
QR-052
ELECTRONICS
System Registration
The KCODE (Fig. 4A) is automatically read during activation when using the OneControl app.
NOTE: If registering on-line using a desktop or laptop PC, the KCODE will have to be entered manually.
To register the ConnectAnywhere system, do as follows:
1. Go to https://lippert.force.com/IoTCommunity/register.
2. Follow the program prompts (Fig. 14).
Fig. 14
To Next Page
Loading...
